Maintenance
whether in a boat or car.
●DO NOT fill fuel container to maximum capacity. Gasoline will expand consid- erably as it warms up and can build up pressure in the fuel container. This can cause fuel leakage and a potential fire hazard.
EWM00700
WARNING
Never get under the lower unit while it is tilted, even if a motor support bar is used. Severe injury could occur if the outboard motor accidentally falls.
ECM00660
CAUTION:
Do not use the tilt support lever or knob when trailering the boat. The outboard motor could shake loose from the tilt support and fall. If the motor cannot be trailered in the normal running position, use an additional support device to secure it in the tilt position.
The outboard motor should be trailered and stored in the normal running position. If there is insufficient road clearance in this position, then trailer the outboard motor in the tilt position using a motor support device such as a transom saver bar. Consult your Yamaha dealer for further details.
ZMU02870
EMU28235
Clamp screw mounting modelsWhen transporting or storing the outboard motor while removed from a boat, keep the outboard motor in the attitude shown.
ZMU02869
NOTE:
Place a towel or something similar under the outboard motor to protect it from damage.
EMU30272
Storing outboard motorWhen storing your Yamaha outboard motor for prolonged periods of time (2 months or longer), several important procedures must be performed to prevent excessive damage. It is advisable to have your outboard motor serviced by an authorized Yamaha dealer prior to storage. However, you, the owner, with a minimum of tools, can perform the following procedures.
ECM01411
CAUTION:
●Do not place the outboard motor on its side before the cooling water has drained from it completely, otherwise water may enter the cylinder through the exhaust port and cause engine trou- ble.
●Store the outboard motor in a dry, well- ventilated place, not in direct sunlight.
32