Maintenance

or other qualified mechanic.

2.Verify whether the idle speed is set to specification. For idle speed specifica-

tions, see page 31.

EMU29111

Checking wiring and connectors

●Check that each grounding wire is properly secured.

●Check that each connector is engaged se- curely.

ZMU02875

EMU29120

Exhaust leakage

Start the engine and check that no exhaust leaks from the joints between the exhaust cover, cylinder head, and body cylinder.

EMU29130

Water leakage

Start the engine and check that no water leaks from the joints between the exhaust cover, cylinder head, and body cylinder.

EMU29171

Checking propeller

EWM00321

WARNING

You could be seriously injured if the engine accidentally starts when you are near the propeller.

●Before inspecting, removing, or install- ing the propeller, remove the spark plug caps from the spark plugs. Also, place the shift control in neutral, turn

the main switch to “” (off) and remove the key, and remove the lanyard from the engine stop switch. Turn off the battery cut-off switch if your boat has one.

●Do not use your hand to hold the pro- peller when loosening or tightening the propeller nut. Put a wood block be- tween the anti-cavitation plate and the propeller to prevent the propeller from turning.

ZMU02876

ZMU01897

Checkpoints

●Check each of the propeller blades for wear, erosion from cavitation or ventila- tion, or other damage.

●Check the propeller shaft for damage.

●Check the splines / shear pin for wear or damage.

●Check for fish line tangled around the pro- peller shaft.

40