Operation
ZMU02030 | ZMU02030 |
2.Move the gear shift lever quickly and firmly from neutral to forward.
N
F
2.On models equipped with a tilt lock le- ver, check that it is in the lock/down po- sition.
3.Move the gear shift lever quickly and firmly from neutral to reverse.
N
R
ZMU02866
Remote control models
1.Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to
forward.
EMU27795
Reverse (manual tilt and hydro tilt models)
EWM00190
WARNING
When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise the boat could become unstable, which could result in loss of control and an accident.
Tiller control models
1.Place the throttle grip in the fully closed position.
ZMU02867
Remote control models
1.Check that the tilt lock lever is in the lock position.
2.Pull up the neutral interlock trigger (if equipped) and move the remote control lever quickly and firmly from neutral to
reverse.
EMU27820
Stopping engine
Before stopping the engine, first let it cool off for a few minutes at idle or low speed. Stopping the engine immediately after operating at high speed is not recommended.
EMU27832
Procedure
1.Push and hold the engine stop button
24