92 Troubleshooting
MD8—Owner’s Manual
MIDI sequencer does not
synchronize to the MD8!
Make sure that your MIDI sequencer supports MTC or MIDI Clock.
Make sure that the MD4s MTC or CLK function is turned on. MTC
appears on the display when MTC is used and MASTER appears
when MIDI Clock is used.
Make sure your MIDI sequencer is set to synchronize to an external
MTC or MIDI Clock source. Refer to the MIDI sequencers user man-
ual.
The MD8 can locate quickly, so some MIDI sequencers may not be
able to synchronize immediately, especially when the MD8 is in AB
Repeat mode.
MMC remote control does
not work.
Check whether you have assigned the correct Device ID number
and whether the MD8 actually receives MMC messages (see
page 81).
A disc is loaded but the
display shows No Disc! Make sure that the disc is loaded correctly.
Cannot eject a disc! Press [TOC WRITE] to write the TOC data to disc. Then eject the
disc.
Symptom Advice