Master Section
7
MD8—Owner’s Manual
Master Section
A
9–10/11–12 input level controls
These rotary controls are used to adjust the level of the 9–10 and
11–12 input signals that are sent to the Stereo bus for mixing.
They’re also used in conjunction with the GROUP ASSIGN
switches to adjust the level of the 9–10 and 11–12 input signals
that are assigned to groups.
B 9–10/11–12 GROUP ASSIGN switches
These switches are used to assign (i.e., send) the 9–10 and 11–12
input signals to the groups. The left-channel signal is sent to odd
Groups 1 and 3, while the right-channel signal is sent to even
Groups 2 and 4. The 9–10 and 11–12 input signals could be the
stereo output signals from another mixer or external effects pro-
cessor. Note that the 9–10 and 11–12 input signals are always sent
to the Stereo bus for mixing regardless of these switch settings.
C GROUP MASTER level controls
These rotary controls adjust the levels of the group signals that
are fed to the tracks.
D STEREO fader
This fader is used to adjust the level of the stereo signal that is
sent to the STEREO OUT jacks. For optimum performance this
fader should be positioned about the 7–8 mark.
E CUE MASTER level control
This control is used to adjust the overall level of the CUE signal.
F CUE MIX TO STEREO switch
This switch is used to feed the CUE bus signals through to the
Stereo bus (i.e., the CUE bus signals are mixed with the
MIC/LINE signals). It’s used for multi-source mixing at mix-
down.
G MONITOR SELECT switches
These switches are used to select the signal source for the MON-
ITOR OUT and headphones.
2TR IN—This switch selects the 2TR IN as the monitor source.
This allows you to monitor the output of a stereo master
recorder during mixdown.
GROUP—These switches select the Group buses as the moni-
tor source. This allows you to monitor signals assigned to tracks.
When only the [1–3] or [2–4] switch is pressed, the monitor sig-
nal is mono. Press both switches to monitor stereo signals.
STEREO—This switch selects the Stereo bus as the monitor
source. This allows you to monitor the STEREO OUT signal and
is typically used during mixdown.
CUE—This switch selects the CUE bus as the monitor source.
This allows you to monitor track signals, which is useful for
punch in/out.
H MONITOR LEVEL control
This rotary control adjusts the level of the monitor signal that is
sent to the MONITOR OUT and PHONES connectors.
1
1
2
3
4
2 1 2
3 4 3 4
GROUP ASSIGN GROUP ASSIGN
1 3
2 4
GROUP
2TR IN
MONITOR
SELECT
CUE MIX
TO STEREO
CUE
MASTER
GROUP
MASTER
STEREO
CUE
010010
010
010
010
010
010
MONITOR
LEVEL
MIN MAX
9-10
STEREO
11-12
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
1
5
8
6
7
4
2
3