Yamaha MDX-E300 optical OUT, To AC outlet, To AC outlet, Optical cable, Optical cable, Optical cable, Audio pin cables, Amplifier/Receiver, Amplifier/Receiver

GETTING STARTED

Connecting your audio system

Digital connections

This unit (MDX-E300)

						To AC outlet
		ANALOG	SYSTEM	DIGITAL		Amplifier/Receiver
IN	D	L	C OUT CONNECTOR	OPTICAL
CD player (etc.) with			1	2	OUT	with optical IN/OUT
optical OUT			IN
		R
DIGITAL OUT						DIGITAL IN	DIGITAL OUT
					Optical cable
OPTICAL						OPTICAL	OPTICAL
Optical cable
					Optical cable

Notes for digital connections

•The DIGITAL OPTICAL IN jacks can be connected to any component with an optical output so you can make direct digital recordings.

•The DIGITAL OPTICAL OUT jacks can be connected to any component with an optical input so you can output digital audio from an MD.

•Before making OPTICAL connections, remove the jack cover(s).

•In order to protect the jacks from dust, be sure to attach the jack covers when the optical jacks are not being used.

Analog connections

This unit (MDX-E300)

Audio pin cables

MD/TAPE
	ANALOG		SYSTEM	DIGITAL
IN D	L	C OUT	CONNECTOR	OPTICAL
			1	2	OUT
				IN
	R

Amplifier/Receiver

Notes for analog connections

To AC outlet

•The white plug on the audio pin cables corresponds to the L (left) channel and the red plug corresponds to the R (right) channel. Be sure to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.

•The ANALOG OUT jacks on this unit should be connected to the MD PLAY jacks on your amplifier. The ANALOG IN jacks on this unit should be connected to the MD REC jacks on your amplifier.

8