Display messages

Can’t copy

Digital recording cannot be performed. (See “SCMS - Serial Copy Management System” on page 22.)

Can’t edit!

Edit operations are not possible.

Can’t REC!

Recording is not possible. The loaded disc may be protected or there may not be enough blank space remaining on the disc.

Can’t REC

Recording is not possible. The loaded disc may be damaged.

DIG in Unlock

No digital signal is being input to the selected digital input jack.

TMP Over!!

The temperature of the unit has exceeded the normal operating temperature. Turn off the unit and let it cool down. If the unit is installed in a place with little ventilation (such as a built in bookcase), move the unit to another location with better ventilation.

Disc Full

Recording is not possible because there is no blank space remaining on the disc.

Title Full!

Additional characters cannot be input for the current title because the maximum number of characters for a single title (250) has already been input.

UTOC W Error

Error occurred when writing to the UTOC.

Not Audio

The inserted disc is not an audio MD.

Tr Protected

The selected track cannot be edited because it is protected.

TOC Full

The disc area allotted for TOC data has become full and further editing is not possible.

UTOC Err L0~4

Problem involving UTOC data.

ADDITIONAL INFORMATION

TOC Writing

The TOC data is being written to the disc. Do not move the unit or pull out the mains lead. If you do, recorded material may not be saved normally.

TOC Reading

The unit is reading the TOC data.

Protected

The record protection on the inserted MD is set to “protect”.

PlayBack MD

The inserted MD is a designed for playback only (you cannot record on this disc).

Monitor Out

The monitor out function is active. The audio signal input to the selected input terminals is output from this unit’s output terminals.

No Track

Blank disc is played or searched.

English

23