Disc or track title erase

This operation lets you erase the title of the disc or the title of tracks on a disc. The title of the disc can only be erased during the stop mode, however, the title of the track can be erased during play or stop mode.

To erase a disc title

1 Press &to set this unit to stop mode.

2 Press EDIT repeatedly to display “Title Erase?”, then press SET/ENTER.•“Disc Title” and “Erase OK?” appear alternatively in the display.

3 Press SET/ENTER again.

•The disc title is erased and “Complete” appears momentarily.To erase a track title1 Use $or ›to select the track with the title you want to erase.

2 Press EDIT repeatedly to display “Title Erase?”, then press SET/ENTER.

•“Track Title” and “Erase OK?” appear alternatively in the display.

3 Press SET/ENTER again.

•The track title is erased and “Complete” appears momentarily.

Notes

•Note that the DISC and TRACK indicators appear in the display when “Title Erase” is displayed to distinguish between the two operations.

•To avoid mistakes when erasing the disc or track names, press DISPLAY repeatedly until the title display screen appears so that titles can be confirmed beforehand.

Move

This function lets you change the position of any track. When you move tracks, all tracks are automatically renumbered.

Example: Moving track 2 to track number 4

1

2

3

 

4

 

5

6

Before

A

B

 

C

 

D

 

E

 

moving

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

 

4

 

5

6

 

 

After

A

C

 

D

 

B

 

E

 

moving

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Use $or ›to select the track you want to move.

EDITING

2 Press EDIT repeatedly to display “Move ?”, then press SET/ENTER.3 Use $or ›to select the track’s destination (new track number).
Selected track

Destination

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Press SET/ENTER.•“Complete” appears momentarily in the display.

Combine

This function lets you combine two consecutive tracks into one. After you combine the tracks, the total number of tracks decreases by one and the tracks following the combined tracks are renumbered.

Example: Combining tracks 2 and 3

1

2

3

4

5

6

Before

A

B

 

C

D

 

E

 

combining

 

 

 

 

 

 

 

 

 

 

 

 

1

2

 

 

 

3

4

5

 

 

 

After

A

 

B+C

 

 

D

 

E

 

combining

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press &to stop playback.

2 Use $or ›to select the second track of the two you want to combine.3 Press EDIT repeatedly to display “Combine ?”, then press SET/ENTER.

•“Check” appears momentarily, then the MD recorder plays the 4 seconds before and after the point where the tracks will be connected. “(track number) + (track number) OK?” appears in the display.

4 Press SET/ENTER again.•The tracks are combined and “Complete” appears momentarily.

Note

•A track recorded in MDLP mode cannot be combined with a track recorded in the non-MDLP mode. (“Impossible” appears in the display.)

English

19