Yamaha MLAN8P - page 22

22
English
Connecting I/O signals between mLAN devices
4-1. In the “From:” field, use the [+1/ENTER] and [–1/EXIT] buttons or the [VALUE] dial to select
the desired device to connect to Channel 1 on the mLAN8P. The Device/Nickname of the
selected device flashes.
If you are setting the output destination, the “To:” field appears instead of the
“From:” field.
4-2. If multiple units of the same model are connected (as in this example), both “Device” fields
display “YAMAHA/A5000,” but does not indicate which is A or B. In this case, press the mode
button to display the Nickname of the selected device.
First, you need to specify a Nickname for each device (page 34).
A temporary Nickname has been set at the factory. The last three digits of
the alphanumeric number (hexadecimal) indicate the device’s unique ID
number.
5. Select “Liverpool (or A5000/Liverpool)” and press the [PAGE ] button. The mLAN8P dis-
plays the Audio In Plug page.
6. In the “From:” field, use the [+1/ENTER] and [–1/EXIT] buttons or the [VALUE] dial to select
the desired mLAN plug to connect to Channel 1 on the mLAN8P. In this example, select
“Channel 3 (AS3).”
If you are setting the output destination, the “To:” field appears instead of the
“From:” field.
NOTE
NOTE
NOTE