8
Specifications■General Specifications
Maximum output level +20dB* (ST OUT L/R) @600Ω, 0.5% THD at 1kHz
+20dB* (AUX SEND 1–2) @600Ω, 0.5% THD at 1kHz
Total harmonic distortion < 0.1% @+14dB* 20Hz–20kHz (ST OUT L/R @600Ω, AUX SEND 1–2 @600Ω)
Frequency response 20Hz–20kHz +1dB, –2dB @+4dB* (ST OUT L/R @600Ω, AUX SEND 1–2 @600Ω)
Hum and noise –127dB* Equivalent input noise (INPUT 1–6)
(Average, Rs=150Ω)–95dB* Residual output noise (ST OUT L/R @600Ω, AUX SEND 1–2 @600Ω)
(20Hz–20kHz) –78dB*(ST OUT L/R) Master fader: nominal
All channel fader: minimum
–63dB*(67dB S/N)(ST OUT L/R) Master fader: nominal
One channel fader: nominal
–78dB*(AUX SEND 1–2) Master level control: nominal
All channel AUX level control: minimum
–63dB*(67dB S/N)(AUX SEND 1–2) Master level control: nominal
One channel fader:
One channel AUX control: nominal
Maximum voltage gain 84dB INPUT (1–6) →ST OUT
44dB INPUT (7L–14R) →ST OUT
76dB INPUT (1–6) →AUX SEND1
86dB INPUT (1–6) →AUX SEND2
62dB INPUT (1–6) →REC OUT
70dB INPUT (1–6) →MONITOR OUT (PFL SW ON)
30dB AUX RETURN →ST OUT
10dB SUB IN →ST OUT
28dB TAPE IN →ST OUT
Crosstalk –70dB @ 1kHz adjacent input channels
–70dB @ 1kHz adjacent output channels
Gain control (1–6) 46dB variable range
INPUT (7L–14R) Input Level Selector
+4/–10/–20dB*
INPUT (1–6) ±15dB maximum boost or cut
Channel equalization HIGH 12kHz shelving
MID 2.5kHz peaking
LOW 80Hz shelving
INPUT (7L–14R) ±15dB maximum boost or cut
Channel equalization HIGH 12kHz shelving
LOW 80Hz shelving
ST OUT Graphic EQ ±12dB at 100, 400, 1k, 5k, 10kHz
LED meters 0dB=+4dB* Output level
Channel PEAK indicators Red LED on each channel lights when post-EQ signal reaches 3dB below clip level.
Phantom power +48V, DC
Power requirements US & Canadian Models: AC 120V, 60Hz
General Model: AC 230V, 50Hz
Power consumption US & Canadian Models: 40W
General Model: 40W
Dimensions (W × H × D) 430 × 104.9 × 360.1 mm
Weight 6.5kg
* 0dB=0.775Vrms.