4
■Master control section
100 400 1k 5k 10k
STEREO GRAPHIC EQUALIZER
00 –20 –15 –10 –6 –3 0 +2 +4 +6 PHANTOM
PFL
TAPE IN
010
MONITOR
010
PHONES
010
TO
MONI
L
R
AUX SEND 2
010
AUX RETURN 2
010
AUX SEND 1
010
AUX RETURN 1
010
STEREO
LR
10
5
0
5
10
15
20
30
00
+12
9
6
3
0
3
6
9
–12
+12
9
6
3
0
3
6
9
–12
E
F
G
H
I
J
K
L
M
N
O
P
MIXER
EST L, R master control
These faders adjust the final level of all channels, and
output the combined signal to the ST OUT jacks. The
OUTPUT LEVEL L, R meters allow you to monitor the L
and R outputs.
FAUX RETURN 1-2 controls
The knobs control the input levels from the effect units
etc. connected to AUX RETURN. Since the signals input
at AUX RETURN pass through this control and are then
output from the ST OUT jacks, AUX RETURN can be
used not only to input the signals from effect units but also
as supplementary inputs.
AUX RETURN 1,2
L/MONO
AUX RETURN
–10dB R
1,2
HA
HA
GAUX SEND 1, 2 controls
These knobs adjust the level of the signals that are output
to AUX SEND 1 and 2.
HGraphic equalizer (5 band)
Since this equalizer is placed before ST OUT, it allows
you to make fine adjustments in equalization to the overall
output, for sound field compensation or to prevent
feedback.
IPFL indicator
This indicator will light when a PFL switch is turned ON.
JPHANTOM indicator
This indicator will light when the PHANTOM switch is
ON.
KOUTPUT LEVEL L, R meters
These meters indicate the output level to the ST OUT
jacks.
LTAPE input control
This knob controls the input signal of the tape deck etc.
that is connected to the TAPE IN jacks.
MTAPE INPUT select switch
This switch selects the destination of the input signal of
the tape deck etc. that is connected to the TAPE IN jacks.
OFF:sent to the stereo bus
ON: sent to MONI OUT (L, R)
NMONITOR control
This knob adjusts the output level from the MONI OUT
jacks.
OPHONES control
This knob adjusts the volume of the headphones
connected to the headphone jack.