11
add-
3.1.3 Channel Mode Messages
Channel Mode Messages are not transmitted.
3.1.4 RPN (Registered Parameter Number)
The RPN MSB and RPN LSB must be sent first for the desired parameter setting,
followed by the data entry values.
RPN Data Entry
MSB LSB MSB LSB
$00 $00 $mm -- Pitch bend sensitivity
mm : $00 – $18 (0 – 24 semitones)
“--” : Not used
Range is two octaves, selectable in one semitone
steps. When power is turned on, this is set to two
semitones.
$00 $01 $mm $l l Master fine tuning
(mm,l l) : ($00,$00) – ($40,$00) – ($7F,$7F)
(-8192x100/8192) – 0 – (+8192x100/8192 cents)
$00 $02 $mm -- Master coarse tuning
mm : $28 – $40 – $58 (-24 – 0 – +24 semitones)
“--” : Not used
3.2 Reception
3.2.1 Note ON/OFF
Receive note range = C-2 – G8
Velocity range = 1 – 127 (Note On velocity only.)
When Receive Note Message is set to OFF, reception is disabled. When drum part
data is received, the MU5 sometimes does not respond to Note Off messages
(depending on the transmitted instrument).
3.2.2 Control Change
The following control change parameters are applicable to the MU5:
Control # Parameter Range
0 Bank select MSB 0 – 127
32 Bank select LSB 0
1 Modulation 0 – 127
6 Data entry MSB 0 – 127
38 Data entry LSB 0 – 127
7 Main volume 0 – 127
10 Pan 0 – 127
11 Expression 0 – 127
64 Hold 1 0 – 127
84 Portamento control 0 – 127
100 RPN LSB 0 – 127
101 RPN MSB 0 – 127
MIDI Data Format