Yamaha MU5 Data Flow Block Diagram

21
Operation
1 Set the HOST SELECT switch to MIDI.
2 Connect the MU5 to the appropriate MIDI device, as shown
in the illustrations above. Use a standard MIDI cable (see
page 22).
3 Turn on the connected device, then the MU5.
4 If you are using a computer, start up your music software,
and set up the appropriate options on the software for opera-
tion with the MU5.
Setting Up the MU5 in Your Music System
■ Data Flow Block Diagram
● When HOST SELECT switch is set to MIDI:
MIDI OUT MIDI IN TO HOST
OUT IN
Keyboard AWM
TONE GENERATOR
● When HOST SELECT switch is set to Mac, PC-1 or PC-2:
* When Local Control is set to Off, the keyboard of the MU5
cannot be used to play the internal AWM Voices. (See page
35.)
MIDI OUT MIDI IN
Keyboard AWM
TONE GENERATOR
TO HOST
OUT IN