21
add-
EG. RELEASE RATE
PITCH BEND RANGE
MOD LFO PITCH DEPTH
CHANNEL AFTER TOUCH PITCH CONTROL
SYSTEM INFORMATION
For the following parameters, which are unavailable on the MU5, the MU5 sends
fixed data.
• System parameters
EXCLUSIVE RECEIVE SWITCH
PROGRAM CHANGE RECEIVE SWITCH
CONTROL CHANGE, VOLUME, EXPRESSION
SOUND MODULE MODE
• Multi Part parameters
REVERB SEND DEPTH
• All Multi Common parameters
• All Drum Setup parameters
• Voice Memory
• Program Change Table
5. Active Sensing (Status FE)
a) Transmission
Not sent.
b) Reception
If after receiving an active sensing (FE) message, and no data is received within 300
msec, All Sound Off, All Note Off and Reset All Controller functions will be
executed, and will return to the condition as if no FE message had been received.
Parameter change
Start Address Description
00 00 00 System
00 00 7F All parameters reset
02 00 00 Multi Part 10
02 01 00 Multi Part 1
::
02 09 00 Multi Part 9
02 0A 00 Multi Part 11
::
02 0F 00 Multi Part 16
03 00 00 System Information
Chart 1-1 : Parameter base map
MIDI Parameter Charts
MIDI Data Format