MV12/6 — Owner’s Manual

Supplement 15

■ Input Specifications
Input
Input
GAIN Input Nominal Input level Connector type
connectors
Select Switch
Control impedance impedance Sensitivity *1 Nominal
Max. before clipping
MIC (+48V) -60 -80 dB (0.078mV) -60 dB (0.775mV) -40 dB (7.75mV)
MIC
50-600Ω
INPUT LINE -34 3kΩmics & -54 dB (1.55mV) -34 dB (15.5mV) -14 dB (155mV) XLR-3-31 type *2
(1-8) MIC (+48V) -16 600Ω lines -36 dB (12.3mV) -16 dB (123mV) +4 dB (1.23V) Euro-block connector *2
MIC
LINE +10 -10 dB (245mV) +10 dB (2.45V) +30 dB (24.5V)
ST INPUT (L, R) -34 10kΩ600Ω lines -54 dB (1.55mV) -34 dB (15.5mV) -14 dB (155mV) RCA phono jack *3
(9/10, 11/12) +10 -10 dB (245mV) +10 dB (2.45V) +30 dB (24.5V) Euro-block connector *3
RETURN (L, R) 10kΩ600Ω lines -12 dB (195mV) +4 dB (1.23V) +20 dB (7.75V) Phone jack (TRS) *3
TAPE IN (L, R) 10kΩ600Ω lines -26 dBV (50.1mV) -10 dBV (316mV) +10 dBV (3.16V) RCA phono jack *3
INSERT IN (1-4) 10kΩ600Ω lines -20 dB (77.5mV) 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *2
*1 Input sensitivity: the lowest level that will produce the nominal output level when the unit is set to maximum gain.
*2 XLR type connector, Euro-block connector, phone jack (TRS) (T=Hot, R=Cold, S=Gnd): balanced type.
*3 RCA phono jack, Euro-block connector, phone jack (TRS) (T=Signal, R= Gnd, S=Gnd): unbalanced type.
• 0dB=0.775Vrms, 0dBV=1Vrms
■ Output Specifications
Output connectors Output Nominal Output level Connector type
impedance impedance Nominal
Max. before clipping
ST OUT (L, R), MONO OUT 150Ω600Ω lines +4 dB (1.23V) +24 dB (12.3V) XLR-3-32 type *1
Euro-block connector *1
AUX SEND (1, 2) 75Ω600Ω lines +4 dB (1.23V) +20 dB (7.75V) Phone jack (TRS) *2
EFFECT SEND
GROUP OUT (1-4) 150Ω600Ω lines +4 dB (1.23V) +24 dB (12.3V) Phone jack (TRS) *3
Euro-block connector *1
MONITOR (L, R) 470Ω10kΩ lines +4 dB (1.23V) +20 dB (7.75V) Euro-block connector *4
INSERT OUT (1-4) 600Ω10kΩ lines 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *2
PHONES 100Ω40Ω phones 3mW 75mW ST phone jack (TRS) *5
REC OUT (L, R) 600Ω10kΩ lines -10 dBV (316mV) +10 dBV (3.16V) RCA phono jack *6
*1 XLR type connector, Euro-block connector: balanced type.
*2 Phone jack (TRS) (T=Hot, R=Cold, S=Gnd): impedance balanced type.
*3 Phone jack (TRS) (T=Hot, R=Cold, S=Gnd): balanced type.
*4 Euro-block connector: unbalanced type.
*5 ST phone jack (TRS) (T=L, R=R, S=Gnd): unbalanced type.
*6 RCA phono jack: unbalanced type.
• 0dB=0.775Vrms, 0dBV=1Vrms

Specifications are subject to change without prior notice.