Yamaha N12, N8 General Specifications, Functions

Appendix

Owner’s Manual

EnglishDeutschFrançaisEspañol

General SpecificationsFunctions

Faders n12 100 mm × 11 (Non-motorized)

n8 60 mm × 7 (Non-motorized)

Power Requirements n12 51 W (PA-30)

n8 33 W (PA-20)

Dimensions (H × D × W) n12 146 × 561 × 515 mm

n8 146 × 518 × 368 mm

Net Weight n12 14 kg

n8 11 kg

Operating Free-air Temperature Range +5 to +35 ˚C

Included Accessories AC power adaptor (PA-30 (n12), PA-20 (n8))

DVD-ROM (Cubase AI4)

CD-ROM (TOOLS for n)

Owner’s Manual

TOOLS for n/Cubase AI4 Installation Guide

IEEE 1394 cable

Monaural Input Channels

CH1–8 (n12)

CH1–4 (n8)

To DIRECT OUT, REC bus,

STEREO bus

Analog Input

MIC Preamp Discrete Class-A MIC preamp (Inverted Darlington Circuitry)

PHANTOM Switch +48 V DC (Only for INPUT A, turn on/off every 4 channels)

PAD Switch 0/26 dB

GAIN Control 44 dB variable (–60 dB to –16 dB)

PHASE Switch Normal/Reversed (CH1–7 (n12), CH1–3 (n8))

High Pass Filter Switch OFF/80 Hz (–12 dB/oct.)

Hi-Z Switch ON/OFF (CH8 (n12), CH4 (n8)), Input impedance: 500 kΩ

AD Converter 24 bit linear, Enhanced dual-bit delta-sigma conversion

Analog/DAW Input

INPUT SELECT Switch A.IN (analog)/DAW (IEEE1394 jack)

COMP LED Lights in red when the compressor is triggered.

MORPH Control Morphs between 5 Sweet Spot Data

DRIVE Control 128 resolution

Equalizer 3 band PEQ ±18 dB, MID frequency range: 100 Hz–10 kHz

ON Switch ON/OFF

REVERB Control Adjusts a post-fader signal after PAN

AUX Control Adjusts a pre-fader signal after PAN

PAN Control 33 resolution

SOLO Switch ON/OFF

DIRECT OUT Pre-fader

Input Meter LED × 4: OVER (red), –3 dB (amber), –14 dB (amber), –48 dB (green)

n12 Pre-fader/Post-fader

n8 Only pre-fader

WET Switch WET ON/OFF

Stereo Input Channels

CH9–12 (n12)

CH5–8 (n8)

To DIRECT OUT, REC bus, STEREO

bus