COMPONENT NAMES (continued)
Remote control
POWER OFF button 14
POWER ON button 14
14 POWER ON/OFF button
MUTE button 15
15 VOLUME UP/DOWN buttons
VOL
RGB/VIDEO buttons 15
PinP button 35
AUTO button 17
MENU button 17
OK button 17
ID button 17
RGB 1 RGB 2 | MUTE VOL |
AV1 AV2 AV3 AV4
AUTO PinP SIZE RECALL
MENU
OK
ID | ID SET |
16SIZE button
16RECALL button
17RETURN button
17SELECT/ADJUST buttons
17ID SET button
Loading Batteries
1. Open the battery cover.
•Slide back and remove the battery
cover in the direction of the arrow.
2.Load the batteries.
•Load the two Size AA batteries included, matching polarity markings on the batteries to those on
the case.
3.Close the battery cover.
•Replace the battery cover in the direction of the arrow and snap it back
into place.
Handling the Remote Control
Use the remote control within 5 m from the front of the unit, within a 30 degree arc either side of the remote control sensor.
With in 30
With in 30 degrees degrees
About 3m | About 3m |
About 5m
CAUTION
•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.
ATTENTION
•Do not drop or exert undue force on the remote control.
•To avoid possible failures. Do not splash the remote control with water or put it on a wet object.
•If you do not intend to use the remote control for an extended period of time, remove the batteries from it.
•If the remote control begins to lack responsiveness, replace the batteries.
•Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.
10
