Yamaha pdm-4210 user manual Color System, Video Input, AV2 1st step, AV2 2nd step

OPERATING INSTRUCTIONS (continued)

SETUP MENU

ENGLISH

MENU

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

	Setup				Setup
OK		System	System 2			Color System
				OK
		Color System
		Video Input				AV1	Auto
		Audio Input				AV2	NTSC-M
		Scart Output	Monitor			AV3	PAL-M
		RGB1	DVI-STB			AV4	PAL-N
		RGB2	Component
			HDTV			Select	Return	Exit
		Select OK Set	Return

Setup		Setup
System	System 2	Video Input
Color System		OK
Video Input		AV1	Auto
Audio Input		AV2	Composite/Component
Scart Output	Monitor	AV3	Auto
RGB1	DVI-STB	AV4	S.Video
RGB2	Component
	HDTV
Select OK Set	Return	Select	Return	Exit

Setup		Setup
System	System 2	Audio Input
Color System	OK	AV1	Stereo
Video Input		AV2	L/Mono
Audio Input		AV3	Stereo
Scart Output	Monitor	AV4	L/Mono
RGB1	DVI-STB	Select	Return	Exit
RGB2	Component
	HDTV
Select OK Set	Return

Selected characters		▲						▲	Setup hint
System		System1				System2			Do not change the original setting.
									(System1 : Europe/Asia, System2 : North America)
Color System
									This should correspond to the color system of the signal from the
									equipment that is connected to the AV1 video input terminal.
			Auto		NTSC-M				• Normally, set this to Auto. The system of the input signal will be
AV1									automatically recognized.
			PAL-N			PAL-M			• If the input signal contains a lot of noise or has a low level at Auto and
									the operation is erratic, set this to match the input signal.
									• When the component signal is received, this setting is not available
									(grayed out).
AV2
AV3									(Same to AV1)
AV4
Video Input
									This should correspond to the signal mode of the signal from the
									equipment that is connected to AV1 video input terminal.
AV1	Auto			HDTV			SDTV/DVD		• Normally, set this to Auto. The signal mode of the input signal will be
									automatically recognized.
									• If the input signal contains a lot of noise or has a low level at Auto and
									operation is erratic, set this to match the input signal.
AV2 (1st step)	RGB			Composite/Component					This should correspond to the signal mode of the signal from the
									equipment that is connected to AV2 video input terminal.
AV2 (2nd step)	Auto			HDTV			SDTV/DVD		This step should be set only when [Composite/Component] is selected on
									the 1st step. The procedure is same as for AV1.
									• If the signal from the equipment that is connected to the AV4 Scart input
AV4		S.Video			Composite				terminal is S.Video or Composite, set this to correspond to that signal.
									• If the signal is RGB, it will be automatically recognized and this setting
									will have no effect.

39