1030 (40-9/16)
700 (27-9/16) 300 (11-13/16)
124
(4-7/8) 89
(3-1/2)
636 (25-1/16)
713 (28-1/16)
77
(3)
397 (15-5/8)
Usage cautionsDimension diagram
■Do not allow an adhesive material, such as an adhesive tape, into
contact with the surface of the pedestal, as they may cause the exterior
surface to peel.
■Wipe off dirt using a dry cloth. To remove ingrained dirt, use a cloth
saturated with a diluted neutral detergent solution and squeezed until
damp. Use of organic solvents, such as benzine, thinner, and household
wax, for cleaning could result in a degenerated or discolored material.
(When using a chemical duster, observe the relevant instructions.)
Assembly Method Prepare a phillips screwdriver before proceeding with assembly.

Assembling the pedestal Attaching the Plasma Monitor to the pedestal

Product SpecificationsParts Configuration Chart
Included in the parts package
M5 x20 screws
x4
M6 x30 screws
x4
Cable clamp x2
Pedestal base x1
Support x2
External
Dimensions
700 (W) x184 (H) x300 (D) mm
(27-9/16 (W) x 7-1/4 (H) x 35-7/16 (D) inches)
Weight 4.2kg
(9 lbs. 4 oz.)
Main material
/Surface
treatment
Pedestal base, Support : Aluminum alloy / Baked paint finish

1. Insert the support into the pedestal base and secure it in

position by tightening four M5 x20 screws from the bottom.

Pedestal base
Support (2)
M5 x20 screw
(4)

2. Insert the pedestal support into the square holes on the

bottom of the plasma monitor.

Plasma monitor
Pedestal

3. Fix the pedestal to the plasma monitor using four M6 x30

screws.

M6 x30 screw (4)

4. Connect the cables to the plasma monitor, attach the

cable clamps to the pedestal where necessary, and fasten

the cables to the clamps.

Cable clamp
Unit: mm (inches)
PDS-242_E 2003.12.11 11:23 2