CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this unit in a well ventilated, cool, dry, clean place with at least 10 cm on the top, 10 cm on the left and right, and 10 cm at the back of this unit — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

14When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

15Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.

16Before moving this unit, press and hold MIC MUTE for 3 seconds to set this unit in standby mode, and disconnect the AC power plug from the wall outlet.

17Condensation will form when the surrounding temperature changes suddenly. Disconnect the power cable from the outlet, then leave the unit alone.

18When using the unit for a long time, the unit may become warm. Turn the power off, then leave the unit alone for cooling.

19Install this unit near the wall outlet and where the AC power plug can be reached easily.

This unit is not disconnected from the AC power source as long as it is connected to the AC wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quan- tity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class A digital apparatus complies with Canadian ICES-003.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING

THE POWER SUPPLY CABLE OF THIS UNIT MUST BE CONNECTED TO THE MAIN SOCKET OUTLET VIA A PROTECTIVE EARTHING CONNECTION.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

Special Instructions for U.K. Model

WARNING-THIS APPARATUS MUST BE

EARTHED.

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

GREEN-AND-YELLOW:EARTH

BLUE:NEUTRAL

BROWN:LIVE

As the colours of the wires in the mains lead of this appa- ratus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

iii

Page 4
Image 4
Yamaha PJP-100UH owner manual Iii

PJP-100UH specifications

The Yamaha PJP-100UH is an innovative portable audio solution designed to meet the demands of various professional applications, particularly in presentation and meeting environments. This compact yet powerful speakerphone is distinguished by its feature-rich capabilities, making it a go-to choice for educators, corporate users, and event organizers.

One of the standout features of the PJP-100UH is its advanced audio technology. The device employs a high-performance microphone array that ensures 360-degree audio pickup. This omnidirectional capability allows it to capture voices clearly from all directions, making it suitable for use in larger rooms where participants are seated at different angles. Coupled with this is the device's use of intelligent noise reduction technology, which enhances speech clarity by minimizing background noise, ensuring that conversations remain clear and distinct.

The PJP-100UH is equipped with Bluetooth connectivity, enabling seamless integration with various devices, including smartphones, tablets, and computers. This wireless capability facilitates quick setup and user convenience, allowing presenters to connect without the hassle of cables. Additionally, the device supports USB connections, making it versatile for a range of devices and platforms.

Another significant characteristic of the Yamaha PJP-100UH is its portability. Weighing under 2 pounds, it is designed for easy transport, making it ideal for on-the-go professionals or those who need to set up in different locations regularly. Its compact design does not compromise on power, as the speakerphone delivers impressive sound output suitable for group discussions or small to mid-sized meeting rooms.

Battery life is another strong point, with the PJP-100UH providing up to 10 hours of continuous use on a single charge. This ensures that users can conduct lengthy meetings or presentations without worrying about power interruptions. The intuitive design includes easy-to-use controls for volume adjustment and call management, further enhancing the user experience.

The Yamaha PJP-100UH stands out for its combination of portability, advanced audio performance, and user-friendly features. Whether for business meetings, educational environments, or collaborative workspaces, this portable speakerphone offers a reliable solution that enhances communication and productivity. With its effective design and robust technology, the PJP-100UH sets a new standard in portable audio solutions.