CONTROLS AND FUNCTIONS
■Top panel
1
|
|
| ALL | MIC/SP |
|
|
| MIC/SP AREA SELECT |
|
|
|
| MIC MUTE | VOL |
2 3 | 4 | 5 | 6 7 | 8 |
1 Microphone indicators |
| 7 MIC MUTE |
| |
A blue LED lights to indicate the audio pick up area.
2Display
The LCD shows the current status of this unit (page 6).
Press the key to temporarily defeat (mute) the microphones of this unit. The LED to the left of the key lights in red during muting.
Pressing the key again during muting cancels it and turns the LED off.
3 (Cancel) | y |
|
Press the key to cancel a setting without saving it or to return to the previous page.
Pressing and holding MIC MUTE for 3 seconds sets this unit to the standby mode. When this unit is in the standby mode, it can be turned on again by pressing any key.
4 
/ (Up/Down)
Press either key to select a setting item or move the cursor up or down.
5
(Enter)
Press the key to enter a setting.
8VOL +/–
Press either key to adjust the speaker volume. Holding either key increases or decreases the volume continuously.
6Area select keys
Press one of the keys to select an audio pickup area in the microphone mode setting (page 16).
4
