Operation
2
2. Operation
Installation and Connections
Install the REV100 in a rack or place it in a location where it is safe
and stable. Connect the AC Adapter to the DC 12V IN inlet, then
plug the Adapter into a mains supply. To prevent the power from
being accidentally disconnected, hook the cable around the anchor.
Press the POWER switch to turn the REV100 on.
Changing Programs
Select the different programs by pressing the and keys. The
REV100 has 99 programs for you to select from.
REVERB
No Name Type Description
1 Vocal Rev 1 Vocal Reverberation suitable for vocals
2 Vocal Rev 2 Hall No.3 has a longer pre-delay and shorter reverb time
3 Vocal Rev 3 Vocal
4 Room Ambience 1
Plate These are mainly for drums and percussions. You can use them for
the entire drum kit or a single drum sound such as snare, bass drum,
etc.
5 Room Ambience 2
6 Room Ambience 3
7 Wood Booth 1
Vocal8 Wood Booth 2
9 Acoustic Piano Plate Reverberation for acoustic piano
10 Club Piano Hall
11 Booming Kick 1 Reverberation for bass drum, with an emphasized low range
12 Booming Kick 2 Room
13 Loud Snare Reverberation for louder snare
14 Acoustic Steel Guitar 1
Plate Reverberation for steel-string acoustic guitar
15 Acoustic Steel Guitar 2
16 String Plate Reverberation mainly used for strings
17 Acoustic Gut Guitar 1 Vocal Reverberation for nylon-string acoustic guitar
18 Acoustic Gut Guitar 2
19 Brass Room 1 Room Brighter and shorter reverb for brass section
20 Brass Room 2
DIGITAL
MODEL REV100
MADE IN JAPAN
DC 12V IN