ANTENNA CONNECTIONS

Each antenna should be connected to the designated terminals correctly, referring to the following figure.

Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement.

Outdoor FM antenna

Indoor FM

Outdoor AM antenna

 

 

 

antenna

 

 

(included)

 

AM loop antenna (included)

300-ohm feeder

75-ohm 75-ohm/300-ohm coaxial antenna adapter cable

Ground

ENGLISH

Connecting the AM loop antenna

1

2

3

Orient so that the best reception is obtained.

*The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.

*The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.

GND terminal

For maximum safety and minimum interference, connect the GND terminal to a good grounding. A good grounding is a metal stake driven into moist earth.

Notes

When connecting the indoor FM antenna, make sure that the grooved part of the connector hole is facing downward.

If you need an outdoor FM antenna to improve FM reception quality, either a 300-ohm feeder or a coaxial cable may be used. In locations troubled by electrical interference, a coaxial cable is preferable.

11