Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V1870 Adjustment of the REAR LEVEL, ENGLISH

1 31

Download 31 pages, 2.85 Mb

Adjustment of the REAR LEVEL

ENGLISH

If desired, you can adjust the sound output level of the rear speakers with this control even if the output level is already set in “Speaker balance adjustment” on page 12.

REAR LEVEL

Illuminates. Adjustable.

●By continuously pressing “+” or “–” on theREAR LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the point which was once set in the “test” mode.

●Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

●If a digital sound field program is not used, the REAR LEVEL control does not function.

Note

The values of the DELAY TIME, the FRONT EFFECT LEVEL, CENTER LEVEL, and REAR LEVEL you set the last time will remain memorized even when the power of this unit is off.

However, if the power plug cord is kept disconnected for more than one week, these values will be invalid.

Contents

OWNER’S MANUAL CONTENTS Note to CATV system installer: Caution: Read this before operating your unit FCC INFORMATION We Want You Listening For A Lifetime ●5 Speaker Configuration <RX-V1070 Front: RMS Output Power, 0.015% THD 20–20,000Hz PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP Directional Enhancement Circuit + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION 5-SpeakerConfiguration 4-SpeakerConfiguration CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING S VIDEO TERMINALS ON SCREEN DISPLAYS CONNECTING SPEAKERS Front speaker connection: Rear speaker connection: Center speaker connection: USING AUX TERMINALS (ON THE FRONT PANEL) <for RX-V1070only ABOUT THE ACCESSORY TERMINALS AC OUTLETS <U.S.A. and General models <Canada model <Australia model ANTENNA CONNECTIONS ENGLISH ADJUSTMENT BEFORE OPERATION Speaker balance adjustment REMOTE CONTROL TRANSMITTER SPEAKER CONFIGURATION For 5 speaker configuration) NORMAL: WIDE: CENTER LEVEL REAR LEVEL FRONT EFFECT LEVEL VOLUME MASTER VOLUME OPERATIONS 7 3, 3, 5 Tuner controls PHONES jack TONE BYPASS To play a source Adjusting the BALANCE control Selecting the SPEAKER system Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch Using the BASS EXTENSION switch TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING Display information PRESET TUNING To program stations To recall a preset station USING DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program To play a source with the digital sound field processor Adjustment of DELAY TIME Adjustment of the FRONT EFFECT LEVEL Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER KEY FUNCTIONS For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To Learn a New Function To Clear a Learned Function To Clear All Learned Functions NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS