Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V1870 ADJUSTMENT BEFORE OPERATION, Speaker balance adjustment, OFF, Illustrations: RX-V1070, Otherwise, the result may not be satisfactory

1 31

Download 31 pages, 2.85 Mb

ADJUSTMENT BEFORE OPERATION

Speaker balance adjustment

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.

Otherwise, the result may not be satisfactory.

*If your monitor is connected to this unit, by turning it on, display information and image on the monitor’s screen will help you to perform this adjustment.

61

5 6

2 4 3

Illustrations: RX-V1070

Parts in shaded areas () are not present on RX-V870.

1

Set to “∞ ”.

2 Select the front speakers to be used.

SPEAKERS

*If you use two front speaker systems, press both the A and B switches.

3

BASS

TREBLE

BALANCE

4

5

6

OFF

Set to “OFF”.

Set to “YPC”.

POWER

Set to “DEFEAT”.

Set to “0”.

12

Contents

OWNER’S MANUAL CONTENTS Note to CATV system installer: Caution: Read this before operating your unit FCC INFORMATION We Want You Listening For A Lifetime ●5 Speaker Configuration <RX-V1070 Front: RMS Output Power, 0.015% THD 20–20,000Hz PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP Directional Enhancement Circuit + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION 5-SpeakerConfiguration 4-SpeakerConfiguration CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING S VIDEO TERMINALS ON SCREEN DISPLAYS CONNECTING SPEAKERS Front speaker connection: Rear speaker connection: Center speaker connection: USING AUX TERMINALS (ON THE FRONT PANEL) <for RX-V1070only ABOUT THE ACCESSORY TERMINALS AC OUTLETS <U.S.A. and General models <Canada model <Australia model ANTENNA CONNECTIONS ENGLISH ADJUSTMENT BEFORE OPERATION Speaker balance adjustment REMOTE CONTROL TRANSMITTER SPEAKER CONFIGURATION For 5 speaker configuration) NORMAL: WIDE: CENTER LEVEL REAR LEVEL FRONT EFFECT LEVEL VOLUME MASTER VOLUME OPERATIONS 7 3, 3, 5 Tuner controls PHONES jack TONE BYPASS To play a source Adjusting the BALANCE control Selecting the SPEAKER system Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch Using the BASS EXTENSION switch TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING Display information PRESET TUNING To program stations To recall a preset station USING DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program To play a source with the digital sound field processor Adjustment of DELAY TIME Adjustment of the FRONT EFFECT LEVEL Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER KEY FUNCTIONS For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To Learn a New Function To Clear a Learned Function To Clear All Learned Functions NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS