Adjustment of DELAY TIME

You can adjust the time difference between the beginning of the source sound and the beginning of the effect sound with the DELAY TIME control.

The DELAY TIME control is effective with all programs. By applying more or less delay, sound effects, background noise, and ambient noise coming at you from the rear speakers can be enhanced or subdued for extra effect.

1. PRO LOGIC: from 15 to 30 milliseconds (Preset value: 20 milliseconds)

2.ENHANCED: from 15 to 30 milliseconds (Preset value: 20 milliseconds)

3.70 mm MOVIE from 15 to 30 milliseconds

THEATER:(Preset value: 10 milliseconds)

4.TV THEATER: from 1 to 50 milliseconds (Preset value: 10 milliseconds)

5.ROCK CONCERT: from 1 to 50 milliseconds (Preset value: 15 milliseconds)

6.JAZZ CLUB: from 1 to 50 milliseconds (Preset value: 11 milliseconds)

7.CHURCH: from 1 to 50 milliseconds (Preset value: 40 milliseconds)

8.CONCERT HALL: from 1 to 50 milliseconds (Preset value: 30 milliseconds)

By continuously pressing “+” or “–” on theDELAY TIME control, the value changes continuously.

However, the value stops changing momentarily at the preset point.

DELAY TIME

DELAY

ms

Adjustable.

Note

Adding too much delay will cause an unnatural effect with some sources. Experiment with the DELAY TIME control to create the effect that you find most suitable.

Adjustment of the FRONT EFFECT LEVEL

If desired, you can adjust the effect sound output level of the front speakers with this control. The output level is preset to be 80. However, you can adjust the level between 1 and 100.

FRONT EFFECT LEVEL

F

Illuminates. Adjustable.

If the digital sound field program is in the DOLBY PRO LOGIC mode, the FRONT EFFECT LEVEL control does not function.

Once the output level is adjusted, the level value will be the same in all the digital sound field programs except for the

DOLBY PRO LOGIC .

If a digital sound field program is not used, the FRONT EFFECT LEVEL control does not function.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker with this control even if the output level is already set in “Speaker balance adjustment” on page 12.

CENTER LEVEL

C

By continuously pressing “+” or “–” on theCENTER LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the point which was once set in the “test” mode.

If the digital sound field program is in the ROCK CONCERT, JAZZ CLUB, CHURCH or CONCERT HALL mode, the CENTER LEVEL control can not function.

Once the output level is adjusted, the level value will be the same in all the digital sound field programs except the above-mentioned ones.

Illuminates. Adjustable.

If a digital sound field program is not used, the CENTER

 

 

 

LEVEL control does not function.

22