■AM loop antenna (included)

AM loop antenna

■Connecting the AM loop antenna

1

3

2

45

Antenna stand

■Outdoor AM antenna

Vinyl covered wire (5 m to 10 m)

■Ground (GND terminal)

CONNECTIONS

The AM loop antenna can be removed from the stand and attached to a wall, etc. However, note that the reception sensitivity may deteriorate if the antenna is attached to a metal or steel reinforced wall.

Notes

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

1Press the tab and unlock the terminal hole.

2 Insert the AM loop antenna lead wires into the

PREPARATION

AM ANT and GND terminals.

 

 

 

3 Return the tab to its original position to lock

 

the lead wires. Lightly pull the lead wires to

 

confirm a good connection.

 

 

 

4 Attach the loop antenna to the antenna stand.

 

5Orient the AM loop antenna so that the best reception is obtained.

If you cannot obtain good reception with the AM loop antenna, connect 5 m to 10 m of vinyl covered wire to the AM ANT terminal and extend it outdoors from a window.

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

English

11