CONTROLS AND FUNCTIONS
Front Panel
1 | 2 | 3 |
| 4 | 5 | 6 | ||
|
|
|
|
|
|
|
|
|
– | + | – | + | L | R |
7 | 8 9 0 q w e r t y u i o |
1STANDBY/ON
Press this switch to turn on the power of this unit or to set this unit in the standby mode. Before turning the power on, set VOLUME to the “ m” position.
Standby mode
In this mode, this unit consumes a very small quantity of power to receive
2Remote control sensor
This receives signals from the remote control.
3Display
This shows various information. (Refer to page 6 for details.)
4INPUT MODE
Press this button to select the input mode between AUTO and ANALOG for the DVD/LD, TV/digital TV and satellite tuner sources.
5INPUT
Turn this selector to select the input source (VCR, SAT/D- TV, DVD/LD, TUNER, CD, AUX) that you want to listen to or watch. The name of the selected input source appears on the display.
6VOLUME
Turn this control to turn up or down the volume.
7PHONES jack
Connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones.
When using headphones only, set both SPEAKERS A and B to the OFF position and press EFFECT to turn off the effect speakers (center and rear) (so that no DSP program indicator lights up on the display).
8SPEAKERS
Set A or B (or both A and B) to the ON position for the main speaker system (connected to this unit) that you want to use. Set the button(s) to the OFF position for the main speaker system that you don’t want to use.
9PROGRAM selector
Press l or h to select a DSP program when the effect speakers (center and rear) are turned on. The selected program indicator lights up on the display.
0EFFECT
Press this button to turn on or off the effect speakers (center and rear). If you turn them off, all Dolby Digital audio signals are directed to the right and left main speakers. In that case, the output levels of the right and left speakers may not match.
4