TUNING
Automatic tuning is effective when station signals are strong and there is no interference. However, if the signal from the station you want to select is weak, you must tune in to it manually (manual tuning).
1
– | + | – | + |
5 4 2 3
Automatic Tuning
1 Use INPUT to select the tuner as the input source.
2Press FM/AM to select the reception band (FM or AM).
“FM” or “AM” appears on the display.
or 
3Press TUNING MODE so that the “AUTO” indicator lights up on the display.
Lights up
4Press PRESET/TUNING (EDIT) to turn “ z ” off.
Turn “ z ” off
26
5Press PRESET/TUNING h once to tune in to a higher frequency and l once to tune in to a lower frequency.
Press the button again if the tuning search does not stop at the desired station.
Note
•If you tune in manually to an FM station, it will be automatically received in monaural mode to increase the signal quality.
y
•Use the manual tuning method if the tuning search does not stop at the desired station (because the signal from the station is weak).
•When tuned in to a station, the frequency of the received station is shown on the display.
Manual Tuning
1 Use INPUT to select the tuner as the input source.
2Press FM/AM to select the reception band (FM or AM).
“FM” or “AM” appears on the display.
or
3Press TUNING MODE so that the “AUTO” indicator goes off.
Goes off
4Press PRESET/TUNING (EDIT) to turn “ z ” off.
Turn “ z ” off
5Press PRESET/TUNING h or l to tune in to the desired station.
To continue the tuning search, hold down the button.