PLAYING A SOURCE

5Play the source.

Refer to the instructions for the source component (and page 26 for details about tuning).

Note

When controlling an audio/video component (tape deck, MD recorder, CD player, DVD/LD player, etc.) with the remote control, press one of the component selector buttons, (TAPE/MD, CD, DVD/LD, etc.), which corresponds to the component you want to control. Refer to “PRESET REMOTE CONTROL” on page 38.

6Adjust the volume to the desired output level.

If desired, adjust BASS, TREBLE, BALANCE, etc. These controls are only effective for the sound from the main speakers.

BASS controls the low-frequency response.

TREBLE controls the high-frequency response.

BALANCE adjusts the balance of the output volume from the right and left main speakers.

 

or

 

Front panel

 

Remote control

– +

– +

LR

 

Front panel

7Use the digital sound field processor.

Refer to page 22.

or

Front panel

Remote control

To mute the sound

Press MUTE on the remote control.

To cancel mute, press MUTE.

Note

• During muting, “MUTE ON” appears on the display.

When you have finished using this unit

Press STANDBY/ON (or POWER) to set this unit in the standby mode.

BGV (background video) function

The BGV function allows you to combine a video image from a video source with a sound from an audio source. (For example, you can listen to classical music while you are watching a video.) This function can only be controlled with the remote control.

Play a video source, and then select an audio source with the input selector buttons on the remote control. The BGV function does not work if you select the audio source with INPUT on the front panel.

20