Speaker cables

10 mm (3/8”)

CONNECTIONS

1Remove approx. 10 mm (3/8”) of insulation from each of the speaker cable.

2Twist the exposed wires of the cable together to prevent short circuits.

Connecting to the MAIN SPEAKERS terminals

Red: positive (+)

2

1 Unscrew the knob.

Black: negative (–)

2 Insert one bare wire into the hole in the side of

1

 

 

3

each terminal.

 

3 Tighten the knob to secure the wire.

Connecting to the REAR and CENTER SPEAKERS terminals

PREPARATION

Red: positive (+)

Black: negative (–) 3 1

2

1Open the tab.

2Insert one bare wire into the hole of each terminal.

3Return the tab to secure the wire.

y

Banana plug connections are also possible. Simply insert the banana plug connector into the corresponding terminal.

English

15