Yamaha RX-V457 Displaying information about the input source, Information about the input signal

PLAYBACK

Notes
	3 Press u / d to display the following
• When playing a DTS-CD/LD, be sure to set INPUT MODE to
	information about the input signal.
DTS.
• If the digital output data of the player has been processed in any			PRESET/CH
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.			ENTER
		A-E/CAT.	A-E/CAT.

■ Displaying information about the input source

You can display the type, format and sampling frequency of the current input signal.

1Select the input source.

CD MD/CD-R TUNER SLEEP

DVD	DTV/CBL	V-AUX	MULTI CH IN
VCR			AMP

2Press AMP to select the AMP mode, then press STRAIGHT so that “STRAIGHT” appears in the display.

(Format)	Signal format display. When the unit
	cannot detect a digital signal it
	automatically switches to analog input.
in	Number of source channels in the input
	signal. For example, a multi-channel
	soundtrack with 3 front channels, 2
	surround channels and LFE, is
	displayed as “3/2/LFE”.
fs	Sampling frequency. When the unit is
	unable to detect the sampling
	frequency “Unknown” appears.
rate	Bit rate. When the unit is unable to
	detect the bit rate “Unknown” appears.
flg	Flag data encoded with DTS or Dolby
	Digital signals that cue this unit to
	automatically switch decoders.

STRAIGHT

AMP

then ENT.

EFFECT

STRAIGHT

32