CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set this unit in the standby mode, and disconnect the AC power plug from the wall outlet.

18 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are: Asia model ..................... 220/230–240 V AC, 50/60 Hz

General model

........................... 110/120/220/230–240 V AC, 50/60 Hz

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

iii

Page 4
Image 4
Yamaha RX-V457 owner manual For Canadian Customers, Serial No

RX-V457 specifications

The Yamaha RX-V457 is a versatile and powerful AV receiver that was crafted to enhance the home audio experience. Designed with both quality and functionality in mind, this receiver appeals to both audiophiles and casual listeners looking for an impressive sound system.

One of the standout features of the RX-V457 is its robust audio performance. It supports a 6.1-channel surround sound system, providing immersive audio quality that brings movies, music, and games to life. With a total output of 630 watts, users can expect dynamic sound that fills the room, whether it’s the subtle sound of a whisper or the booming action of a blockbuster movie.

This AV receiver also comes equipped with Yamaha’s Digital ToP-ART (Total Purity Audio Reproduction Technology). This technology minimizes signal interference, which results in clearer audio and better overall sound quality. Additionally, the RX-V457 employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) feature. This automatic calibration system analyzes the room’s acoustics and adjusts the receiver’s settings for optimal performance, ensuring that every listener experiences the best sound quality, regardless of where they are seated.

Connectivity options are plentiful with the RX-V457. It boasts a range of audio and video inputs, including multiple HDMI inputs, component video, and composite video connections. This extensive capability allows users to connect various devices such as DVD players, gaming consoles, and streaming devices seamlessly. Furthermore, the receiver supports both analog and digital audio signals, making it an adaptable choice for diverse audio sources.

In terms of user interface, the Yamaha RX-V457 is designed for ease of use. The straightforward remote control and on-screen display make navigating through options simple, allowing users to adjust settings or switch inputs without hassle.

The aesthetics of the RX-V457 is sleek and unobtrusive, fitting comfortably into a variety of home entertainment setups. The build quality is robust, ensuring longevity and reliability for years to come. Overall, the Yamaha RX-V457 delivers a balanced combination of advanced technology, user-friendly features, and high-fidelity sound, making it an excellent choice for anyone looking to elevate their audio experience at home.