Yamaha RX-V457 owner manual Switching library codes, Clearing set up remote control codes

REMOTE CONTROL FEATURES

Switching library codes

You can select the unit you want to operate with the remote control by entering the library code.

1Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

2Enter the code number “9991” or “9992” (see the table below).

The TRANSMIT indicator on the remote control flashes twice, and the library code is changed.

AMP library		Remote
code
		control ID
(remote	Function
		(unit setting:
control
		see page 62)
setting)
9991	To operate this unit	ID1
	using the default code.	(initial setting)
	To operate this unit
9992	using an alternative	ID2
	code.

When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.

Note

You must also make settings for the receiver/amplifier.

Clearing set up remote control codes

■Clearing a setup remote control code for component control

1Press an input selector button or / to select the component control for which you want to clear the remote control code.

CD MD/CD-R TUNER SLEEP

DVD	DTV/CBL	V-AUX	MULTI CH IN
VCR			AMP

2Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

3Enter the code number “0000”.

The TRANSMIT indicator on the remote control flashes twice, and the remote control code for the selected component is cleared.

y

•If you do not press any button within 30 seconds after step 2, the clearing process is canceled. If this happens, start over from step 1.

•You can clear all setup remote control codes at once by entering the code number “9990”.

66