Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V470 ADJUSTMENT BEFORE OPERATION, Speaker balance adjustment

1 27

Download 27 pages, 366.27 Kb

ADJUSTMENT BEFORE OPERATION

61

CENTER MODE	ŸPRO LOGIC–ENHANCED		CNCT VIDEO
7	ŸSURROUND		6
+	MONO MOVIE	ROCK	HALL
DELAY		– VOLUME +
TIME	EFFECT	– VOLUME +

–

5

2

3

4

Speaker balance adjustment

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor.

1 Turn off the power and set the VOLUME control to the “ ” position.

VOLUME

0

–dB

2 Select the front speakers to be used.

SPEAKERS

AB

ON _ ON

OFF — OFF

÷If you use two front speaker systems, press both the A and B switches.

3 Set the BASS and TREBLE controls to the DEFEAT position.

BASSTREBLE

DEFEATDEFEAT

–5

5+

–5

5+

4 Set the BALANCE control to the 0 position.

BALANCE

0

L5 5R

5 Turn on the power.

POWER

6 Select the ŸPRO LOGIC or ENHANCED mode.

ŸPRO LOGIC — ENHANCED

÷The PROGRAM button on the front panel can also be used instead of the ŸPRO LOGIC or ENHANCED button on the remote control transmitter. Turn on the EFFECT button and then press the £ or ™ side of the PROGRAM button so that the ŸPRO LOGIC or ENHANCED indicator lights on the display.

7 Select the center mode according to your speaker configuration by pressing the CENTER MODE button on the remote control transmitter.

(Refer to “SPEAKER CONFIGURATION” on page 6.)

CENTER MODE

NORMAL	NORMAL
ms	WIDE
	PHANTOM

On the feature of each mode, refer to “Note” shown on the next page.

10

Contents

Natural Sound Stereo Receiver CAUTION OWNER'S MANUAL IMPORTANT WARNING We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT SUPPLIED ACCESSORIES FEATURES 5-SpeakerConfiguration Digital Sound Field Processor Automatic Input Balance Control for Dolby Surround PROFILE OF THIS UNIT Digital Sound Field Processing “ENHANCED” Dolby Pro Logic Surround Dolby Pro Logic Surround SPEAKER SETTING UP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION 4-SpeakerConfiguration SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS Notes on front speakers connections ABOUT THE AC OUTLETS How to Connect ANTENNA CONNECTIONS Connecting the AM loop antenna ADJUSTMENT BEFORE OPERATION Speaker balance adjustment CONTINUED Note For 5-speakerconfiguration NORMAL: WIDE: Page PLAYING A SOURCE RECORDING A SOURCE ADJUSTING THE BALANCE AND TONE To adjust the BALANCE control To adjust the BASS and TREBLE controls When you listen to the sound with headphones TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING Display information PRESET TUNING To store stations To recall a preset station Memory back-up USING DIGITAL SOUND FIELD PROCESSOR (DSP) Controls and indicators for DSP Main unit Remote control transmitter Description of Each Sound Field Program Notes on Operation of Sound Field Programs Description of ŸDolby Pro Logic Surround To play a source with the digital sound field processor Delay time adjustment Adjustment of the front effect level (Except for ŸPRO LOGIC) Adjustment of the rear level Adjustment of the center level (Only for ŸPRO LOGIC and ENHANCED) SETTING THE SLEEP TIMER To set the SLEEP timer To cancel the SLEEP timer REMOTE CONTROL TRANSMITTER Button Functions To control this unit To control other components STANDBY mode (Europe model only) NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS