PRESET TUNING

This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you can select any desired station simply by specifying the corresponding preset station number. Up to 40 stations (8 stations per page) can be stored.

4/2 2/1 3,5

To store stations

1 Tune in the desired station.

(Refer to the previous page for tuning procedures.)

2 Press the MEMORY button.

MEMORY

\

FM

MHz

 

MEMORY

 

Blinks for about 5 seconds.

3 Select the desired page (A – E) by pressing the A/B/ C/D/E button.

A/B/C/D/E

\

PRESET

 

FM

MHz

MEMORY

Appears.

4 While the MEMORY indicator blinks, press the PRESET STATIONS button so that the desired preset station number (1 - 8) appears on the display.

Selected preset station number

PRESET STATIONS

DOWNUP

\ PRESET

FM

MHz

MEMORY

5 Press the MEMORY button.

MEMORY

PRESET

\ FM MHz

Shows the displayed station has been stored in A1.

÷Perform steps 1 through 5 to store other stations.

To recall a preset station

1 Select the page of the preset station to be received by pressing the A/B/C/D/E button.

A/B/C/D/E

PRESET

\ FM MHz

Appears.

2 Press the PRESET STATIONS button so that the desired preset station number (1 - 8) appears on the display.

PRESET STATIONS

DOWNUP

Notes

÷A new setting can be stored in place of the former one.

÷For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if the POWER switch is turned off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than two weeks, the memory may be erased. If so, it can be re-stored simply by following the PRESET TUNING steps.

17