To play a source with the digital sound field processor
CENTER MODE | ŸPRO | CNCT VIDEO |
| |
+ | ŸSURROUND |
| 2 | |
MONO MOVIE | ROCK | HALL | ||
DELAY |
| – VOLUME + |
| |
TIME | EFFECT |
| ||
–
1 Play a source.
(Follow steps 1, 2, 3, 4, 5, and 6 shown in “PLAYING A SOURCE” on page 13.)
2 Select the desired DSP program that is suitable for the source.
ŸPRO
ŸSURROUND |
|
MONO MOVIE ROCK | HALL |
÷The PROGRAM button on the front panel can also be used instead of the DSP program buttons on the remote control transmitter. Turn on the EFFECT button and then press the ™ or £ side of the PROGRAM button so that the desired DSP program indicator appears on the display. When the EFFECT button is turned on, the previously selected delay time and DSP program indicator appear on the display.
÷If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on this page and the next page.)
Note
If you prefer to cancel the DSP mode, press the EFFECT button. The sound will be the normal
Delay time adjustment
÷The delay time can be adjusted with the remote control transmitter only.
You can adjust the time difference between the beginning of the source sound and the beginning of the effect sound with the DELAY TIME controls.
The delay time adjustment is effective with all programs. By applying more or less delay, sound effects, background noise, and ambient noise coming at you from the rear speakers can be enhanced or subdued for extra effect.
+ |
| Delay time |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
DELAY | \ | DELAY |
| NORMAL | ||
|
|
|
| |||
TIME |
| Ÿ | ms |
|
|
|
|
| PRO LOGIC |
|
|
|
|
— |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| Program |
| Delay time range | ||||
|
|
|
|
|
| |
ŸPRO LOGIC | from 15 to 30 milliseconds | |||||
| (Preset value: 20 milliseconds) | |||||
|
|
|
|
|
| |
ENHANCED | from 15 to 30 milliseconds | |||||
| (Preset value: 20 milliseconds) | |||||
|
|
|
|
|
| |
CONCERT VIDEO | from 1 to 100 milliseconds | |||||
| (Preset value: 25 milliseconds) | |||||
|
|
|
|
|
| |
MONO MOVIE | from 1 to 100 milliseconds | |||||
| (Preset value: 25 milliseconds) | |||||
|
|
|
|
|
| |
ROCK CONCERT | from 1 to 100 milliseconds | |||||
| (Preset value: 15 milliseconds) | |||||
|
|
|
|
|
| |
CONCERT HALL | from 1 to 100 milliseconds | |||||
| (Preset value: 30 milliseconds) | |||||
|
|
|
|
|
|
|
÷By continuously pressing the DELAY TIME + or – control, the value changes continuously.
However, the value stops changing momentarily at the preset point.
Notes
÷Adding too much delay will cause an unnatural effect with some sources. Experiment with the DELAY TIME controls to create the effect that you find most suitable.
÷The values of the DELAY TIME controls you set the last time will remain memorized even when the power of this unit is off.
However, if the power plug cord is kept disconnected for more than two weeks, these values will be invalid.
20