Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V470 NOTES ABOUT THE REMOTE CONTROL TRANSMITTER, Battery installation, Remote control transmitter operation range, Battery replacement

1 27

Download 27 pages, 366.27 Kb

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

1Press the lid's locking tab down and, at the same time, pull out the battery compartment lid in the direction of the arrow.

Remote control transmitter operation range

Remote control sensor

2Install the batteries (size AA, R6, UM-3) with correct polarities. Follow the diagram in the compartment.

+

–

–

+

Within approximately 7 m (23 feet)

30° 30°

3Position the bottom portion of the compartment lid in place, and push the top portion of the lid in until it clicks into place.

Notes

÷There should be no large obstacles between the remote control transmitter and the main unit.

÷If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting.

Battery replacement

If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.

Notes

÷Use only AA, R6, UM-3 batteries for replacement.

÷Be sure the polarities are correct. (See the illustration inside the battery compartment.)

÷Remove the batteries if the remote control transmitter will not be used for an extended period of time.

÷If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

24

Contents

Natural Sound Stereo Receiver CAUTION OWNER'S MANUAL IMPORTANT WARNING We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT SUPPLIED ACCESSORIES FEATURES 5-SpeakerConfiguration Digital Sound Field Processor Automatic Input Balance Control for Dolby Surround PROFILE OF THIS UNIT Digital Sound Field Processing “ENHANCED” Dolby Pro Logic Surround Dolby Pro Logic Surround SPEAKER SETTING UP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION 4-SpeakerConfiguration SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS Notes on front speakers connections ABOUT THE AC OUTLETS How to Connect ANTENNA CONNECTIONS Connecting the AM loop antenna ADJUSTMENT BEFORE OPERATION Speaker balance adjustment CONTINUED Note For 5-speakerconfiguration NORMAL: WIDE: Page PLAYING A SOURCE RECORDING A SOURCE ADJUSTING THE BALANCE AND TONE To adjust the BALANCE control To adjust the BASS and TREBLE controls When you listen to the sound with headphones TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING Display information PRESET TUNING To store stations To recall a preset station Memory back-up USING DIGITAL SOUND FIELD PROCESSOR (DSP) Controls and indicators for DSP Main unit Remote control transmitter Description of Each Sound Field Program Notes on Operation of Sound Field Programs Description of ŸDolby Pro Logic Surround To play a source with the digital sound field processor Delay time adjustment Adjustment of the front effect level (Except for ŸPRO LOGIC) Adjustment of the rear level Adjustment of the center level (Only for ŸPRO LOGIC and ENHANCED) SETTING THE SLEEP TIMER To set the SLEEP timer To cancel the SLEEP timer REMOTE CONTROL TRANSMITTER Button Functions To control this unit To control other components STANDBY mode (Europe model only) NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS