8 9

10

8 Press the TEST button.

TEST

\

TEST

Blinks.

The TEST indicator continues blinking until the TEST button is pressed again to complete the adjustment.

10Adjust the BALANCE control so that the sound output level of the left front speaker and the right front speaker are the same.

BALANCE

0

TEST

L5 5R

Adjust while the L or R indicator is lit.

9 Turn up the volume.

VOLUME

0

–dB

You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, and then the rear speakers, for about two seconds each. The display changes as shown below.

Front (L)

Center

\

 

TEST

 

»

«

 

* Rear (L

Front (R)

and R)

 

*The test tone from the left rear speaker and the right rear speaker will be heard at the same time.

CONTINUED 3Note

In step 7, when you select the center mode, note the following.

For 5-speaker configuration

NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. In this mode, the bass tone will be output from the front speakers.

WIDE: Select this mode when you use the center speaker approximately the same size as the front speakers.

For 4-speaker configuration

PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right front speakers.

11