Manuals / Brands / TV and Video / Satellite TV System / Yamaha / TV and Video / Satellite TV System

Yamaha RX-V590RDS TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE)

1 36

Download 36 pages, 471.75 Kb

1, 4					2

English

TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE)

1 Select the source to be recorded.

TAPE

MONITOR TUNER CD PHONO

VIDEO AUX VCR 2

LD/TV

2 Play the source and then turn the VOLUME control

up to confirm the input source. (For detailed information on the tuning operations, refer to page 19.)

3 Set the tape deck or VCR to the recording mode.

4 If the tape deck is used for recording, you can monitor the sounds being recorded by pressing TAPE MONITOR.

TAPE

MONITOR TUNER CD PHONO

VIDEO

VCR 2

VCR 1

LD/TV

Note

DSP, VOLUME, BASS, TREBLE and BALANCE control

settings have no effect on the material being recorded.

Contents

Page Page FEATURES Power, 0.04% THD, 20–20,000Hz Center: 70W (8Ω ) RMS Output Power CONTENTS CAUTION : READ THIS BEFORE OPERATING YOUR UNIT For U.K. customers PROFILE OF THIS UNIT SPEAKER SETUP FOR THIS UNIT CONNECTIONS CONNECTING TO S VIDEO TERMINALS CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) CONNECTING SPEAKERS Note on front speaker connection: Note on center speaker connection: l0 dB 0 dB FRONT How to Connect: ABOUT THE ACCESSORY TERMINALS AC OUTLET(S) (SWITCHED) GND terminal (For turntable use) FRONT OUTPUT terminals REAR OUTPUT terminals ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT Page Page BASIC OPERATIONS TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) When you listen with headphones TUNING OPERATIONS PRESET TUNING AUTOMATIC PRESET TUNING To store stations When the automatic preset tuning is finished To recall a preset station EXCHANGING PRESET STATIONS RECEIVING RDS STATIONS To turn the unit into the PS mode or PTY mode Calling a preset RDS station by the station name (PS SEEK) You do not have to input a full name for searching for the station To cancel this function Calling a preset RDS station by the program type (PTY SEEK) USING DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program Description of Dolby Pro Logic Surround To play a source with the digital sound field processor Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER REMOTE CONTROL TRANSMITTER STANDBY mode NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range Battery replacement TROUBLESHOOTING SPECIFICATIONS