To play a source with the digital sound field processor

English

3 2

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 16.

2 Select the desired program that is suitable for the source.

DIGITAL SOUND FIELD PROCESSOR

 

 

 

 

CONCERT

MONO

PRO LOGIC ENHANCED VIDEO

MOVIE STADIUM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONCERT

HALL EFFECT

PRO LOGIC

The selected program name is shown on the display.

REC PAUSE

DIR A

PLAY

DIR B

TAPE MON

 

TEST

 

STOP

 

LD/TV

 

 

PRO LOGIC

ENHANCED CNCT VIDEO

VCR 1

2

CENTER

SUR.

 

 

LEVEL

MONO MOVIE

STADIUM

DISCO

VCR 2

 

 

ROCK

HALL

EFFECT

V AUX

 

 

ON/OFF

 

REAR

 

 

 

 

 

LEVEL

DELAY TIME

VOLUME

 

3

3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on this page and the next page.)

Notes

●If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

●When CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

●When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

* The following adjustments can be done on the remote control transmitter as well as on the front panel.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 15.

Lights up.

CENTER LEVEL

CENTER

Adjustable

By continuously pressing “+” or “–” on theCENTER LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the preset point (80).

●If the digital sound field program CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, the CENTER LEVEL control cannot function.

●Once the output level is adjusted, the level value will be the same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED programs.

●If a digital sound field program is not used, the CENTER LEVEL control will not function.

29