Yamaha RX-V620 ■SUBWOOFER jack

CONNECTIONS

Main speakers A Main speakers B

Right Left Right Left

(U.S.A. model)		+	–	SPEAKERS	+
VD	R			–		L
/CBL	A
	MAIN
ITOR						AC OUTLETS
UT	B
COMPONENT VIDEO
MONITOR OUT
						SWITCHED
VIDEO						100W MAX.
						TOTAL
	CENTER

+–

S VIDEO							IMPEDANCE SELECTOR
							SET BEFORE POWER ON
						MAIN A OR B: 4		MIN. /SPEAKER	MAIN A OR B: 8		MIN. /SPEAKER
	+	–	–	+			A + B: 8 MIN. /SPEAKER			A + B:16	MIN. /SPEAKER
R					L	CENTER	: 6	MIN. /SPEAKER	CENTER	: 8	MIN. /SPEAKER
						REAR	: 6	MIN. /SPEAKER	REAR	: 8	MIN. /SPEAKER
REAR
(SURROUND)

SUB

WOOFER

OUTPUT

Right	Left
Subwoofer Center speaker	Rear speakers
system

■SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack. (The cut-off frequency of this jack is 90 Hz.) The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed if they are assigned to this jack.

Notes

•Adjust the subwoofer volume according to the operating instructions for the subwoofer. (Fine adjustment is possible using this unit’s output level control of the effect speakers.)

•Depending on the settings of “1 SPEAKER SET”, “6 DOLBY D. SET” and “7 DTS SET” on the SET MENU, some signals may not be output from the SUBWOOFER jack.

PREPARATION

English

17