The BGV function allows you to combine a video image from a video source with a sound from an audio source. (For example, you can listen to classical music while you are watching a video.)
Select a source from the video group and then select a source from the audio group with the input selector buttons on the remote control. The BGV function does not work if you select the sources with INPUT l / h on the front panel.
Input Modes and Indications
When using the remote control, set the selector dial to the AMP/TUN position.This unit comes with various input jacks. If your component is connected to more than one type of input jack, you can set the priority of the input signal.
Press INPUT MODE (or the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the front panel display and on the video monitor.
INPUT MODE
or
| BASIC PLAYBACK |
| AUTO: | In this mode, the input signal is |
| automatically selected in the |
| following order: |
| 1) Dolby Digital or DTS signal |
| 2) Digital (PCM) signal |
| 3) Analog signal |
| DTS: | In this mode, only the digital input |
| signal encoded with DTS is |
| selected even if another signal is |
| input at the same time. |
ANLG (ANALOG): In this mode, only the analog input signal is selected even if a digital signal is input at the same time.
Notes
•If digital signals are input from both the COAXIAL and OPTICAL jacks, the digital signal from the COAXIAL jack is selected.
•When AUTO is selected, this unit automatically determines the type of signal. If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate setting and reproduces 5.1 channel source.
•The sound output may be interrupted for some LD players and DVD players in the following situation:
When the input mode has been set to AUTO and a search is performed while playing the source encoded with a Dolby Digital or DTS signal, the sound may delay for a moment when playback is resumed.
•Depending on the LD player, playback may not be made when playing an LD that is not digitally recorded with the input mode set to AUTO. If this happens, set the input mode to
ANALOG.OPERATION | BASIC |
|
|
Front panel | Remote control | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VOLUME | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input mode
English
25