Yamaha RX-V757 ■Speaker distance C)SP DISTANCE, ■Center graphic equalizer D)EQUALIZER, SB L, SB R, SWFR, CENTER, SUR. L, SUR. R, PRES L, PRES R, FRONT L, FRONT R, CNTR GEQ

■Speaker distance C)SP DISTANCE

Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time.

C)SP DISTANCE

. UNIT;;;;;;meters

FRONT
L;;;;3.00m

FRONT
R;;;;3.00m

CENTER;;;;;3.00m

[
]/[
]:Up/Down

[<]/[>]:Adjust

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting:

U.S.A. and Canada models: feet (ft)

Other models: meters (m)

•Select meters to input speaker distances in meters.

•Select feet to input sp eaker distances in feet.

Speaker distances

Choices: 0.3 to 24.00 m (1 to 80 ft)

•FRONT L adjusts the distance of the front left speaker. Initial setting: 3.0 m (10.0 ft)

•FRONT R adjusts the distance of the front right speaker. Initial setting: 3.0 m (10.0 ft)

•CENTER adjusts the distance of the center speaker. Initial setting: 3.0 m (10.0 ft)

•SUR. L adjusts the distance of the surround left speaker. Initial setting: 3.0 m (10.0 ft)

•SUR. R adjusts the distance of the surround right speaker. Initial setting: 3.0 m (10.0 ft)

•SB L* adjusts the distance of the surround back left speaker. Initial setting: 2.10 m (7.0 ft)

•SB R* adjusts the distance of the surround back right speaker. Initial setting: 2.10 m (7.0 ft)

•SWFR adjusts the distance of the subwoofer. Initial setting: 3.0 m (10.0 ft)

•PRES L adjusts the distance of the presence left speaker. Initial setting: 3.0 m (10.0 ft)

•PRES R adjusts the distance of the presence right speaker. Initial setting: 3.0 m (10.0 ft)

*Instead of SB L and SB R, SUR. B will be displayed if you selected only one surround back speaker in SUR. B L/R SP (page 65).

SET MENU

■Center graphic equalizer D)EQUALIZER

Use this feature to select the parametric (AUTO PEQ) or graphic equalizer (CNTR GEQ).

Equalizer EQ TYPE SELECT

Select to change the type of equalizer used by this unit. Choices: AUTO PEQ, CNTR GEQ, EQ OFF

•Select AUTO PEQ to use the equalizer adjusted in auto setup.

•Select CNTR GEQ to adjust the built-in 5-band graphic equalizer so that the tonal quality of the center speaker matches that of the front left and right speakers.

•Select EQ OFF to cancel equalizing.

Center graphic equalizer CENTER GEQ

When CNTR GEQ is selected, use this feature to output a test tone and adjust the tonal quality so that it matches that of the front left speaker.

You can adjust 5 frequency bands: 100Hz, 300Hz, 1kHz, 3kHz, 10kHz Choices: –6 to +6 dB

Initial setting: 0 dB

D)EQUALIZER

.
TEST

)OFF

ON

-





+

100Hz










0dB

300Hz










0dB

1kHz










0dB

3kHz










0dB

10kHz










0dB

[
]/[
]:Up/Down

[<]/[>]:Adjust

•Select ON to output test t ones from the front left and center speakers, and adjust the tonal quality of the center speaker.

•Select OFF to stop the test tone and output the currently selected source component.

•Press u / d to select a frequency band.

•Press j / i to adjust the selected frequency band.

OPERATION ADVANCED

67