Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V890 4 FRONT CH — MAINÊ IN terminals, 5FRONTÊ CH — PREÊ OUT terminals, 6 FRONT LEVEL switch

1 39

Download 39 pages, 783.98 Kb

4

5

6

TAPE 2

REC

OUT

MAIN

IN

FRONT

CH

PRE

OUT

FRONT 0dB

LEVEL

-10dB

4 FRONT CH — MAINÊ IN terminals

6 FRONT LEVEL switch

These terminals are for line input to the built-in front channel amplifier. Leave the jumper bars connected to the PREÊ OUT terminals when you use the built-in amplifier.

However, if you drive front speakers with an external stereo power amplifier, remove the jumper bars.

Normally set to “0Ê dB”. If desired, you can decrease the output level at the FRONT SPEAKERS terminals by 10Ê dB by setting this switch to “–10Ê dB”.

5FRONTÊ CH — PREÊ OUT terminals

These terminals are for front main channel line output. Leave the jumper bars connected to the MAINÊ IN terminals when you use the built-in amplifier.

However, if you drive front speakers with an external stereo power amplifier, remove the jumper bars and connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.

12

Contents

Natural Sound Stereo Receiver OWNER’S MANUAL Contents SAFETY INSTRUCTIONS CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FCC INFORMATION We Want You Listening For A Lifetime SUPPLIED ACCESSORIES Features PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP Directional Enhancement Circuit + DSP SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED SPEAKER CONFIGURATION Five-SpeakerConfiguration Four-SpeakerConfiguration SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS ABOUT THE ACCESSORY TERMINALS 1LOW PASS terminal 2CENTER OUTPUT terminal 3REAR OUTPUT terminals GND terminal (For turntable use) 4 FRONT CH — MAINÊ IN terminals 5FRONTÊ CH — PREÊ OUT terminals CONNECTING SÊ VIDEO TERMINALS ON SCREEN DISPLAY CONNECTING TO VIDEO AUX TERMINALS (FRONT PANEL) ANTENNA CONNECTIONS ADJUSTMENT BEFORE OPERATION SPEAKER BALANCE ADJUSTMENT Five speaker configuration Four speaker configuration Page BASIC OPERATIONS To play a source To record a source to tape (or dub from tape to tape) Selecting the SPEAKERS system Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch Using the BASS EXTENSION switch TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING PRESET TUNING Manual Preset Tuning To program stations To recall a preset station Automatic Preset Tuning Exchanging Preset Stations USING THE DIGITAL SOUND FIELD PROCESSOR (DSP) Description of Each Sound Field Program Description of Dolby Pro Logic Surround To play a source with the digital sound field processor Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER Battery installation Battery replacement STANDBY mode (Singapore model only) For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To learn a new function To clear a learned function To clear all learned functions Troubleshooting guide TROUBLESHOOTING SPECIFICATIONS