Selecting the SPEAKERS system
Because one or two speaker systems (as front speak- ers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.
SPEAKERS
A B
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.
BALANCE
0
l l
22
33
4 | 4 |
L 5 | 5 R |
Note:
This control is effective only for the sound from the front speakers.
Adjusting the BASS and TREBLE controls
BASS
Turn this clockwise to increase (or
TREBLE
Turn this clockwise to increase (or
BASSTREBLE
l | 0 | l | 0 |
l | l | ||
2 | 2 | 2 | 2 |
3 | 3 | 3 | 3 |
4 | 4 | 4 | 4 |
5 | 5 | 5 | 5 |
Note:
These controls are effective only for the sound from the front speakers.
Using the TONE BYPASS switch
Press this switch to revert instantly to the flat states of the BASS and TREBLE controls without changing the setting of these controls.
TONE
BYPASS
ON
OFF
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch to the “ON” position. This switch is effective only on the sound from the front speakers.
BASS
EXTENSION
ON
OFF
MUTING Key (Remote Transmitter)
Press this key to mute the master volume. While mute is engaged, an indicator on the master VOLUME control flashes. Press again to
MUTING
|
|
|
|
|
| VOLUME | ||
SPORTS | STADIUM | ROCK | JAZZ CLUB |
| l8 | l6 | l4 | |
5 | 6 | 7 | 8 |
|
| 20 |
| l2 |
|
| 24 |
| l0 | ||||
|
|
|
|
|
|
| ||
CHURCH | HALL |
| EFFECT |
| Flash | 28 |
| 8 |
|
|
|
| VOLUME |
| |||
9 | 10 | DSP | ON/OFF | MASTER |
|
|
|
|
|
|
|
|
|
| 34 |
| 6 |
|
| + |
| + |
| 40 |
| 4 |
CENTER LEVEL |
| TEST |
|
| 50 |
| 3 | |
— | + | DELAY |
|
|
| 60 |
| 2 |
TIME |
|
|
|
| ||||
REAR LEVEL |
| MUTING |
|
| 70 |
| l | |
— | + | — |
| — |
|
| 0 | |
|
|
|
|
|
|
|
| |
RESET | CLEAR |
|
|
|
|
|
|
|
When you listen with headphones
PHONES
Connect the headphones to the PHONES jack. You can listen to the sound to be output from the front speakers through headphones.
When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT switch.
20