2

1

To record a source to tape (or dub from tape to tape)

1 Select the source to be recorded.

REC OUT

SOURCE

TAPE 1

LD/TV

VCR 1

TUNER

VCR 2

CD

VIDEO AUX

PHONO

2 Play the source and press the corresponding input selector, then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to page 21.)

 

 

 

 

 

VOLUME

TAPE 2

 

 

 

20

l8 l6 l4

MONITOR TAPE 1 TUNER

CD

PHONO

l2

24

l0

 

 

 

 

28

8

VIDEO AUX VCR 2

VCR 1

LD/TV

34

6

40

4

 

 

 

 

 

 

 

 

50

3

 

 

 

 

60

2

 

 

 

 

70

l

 

 

 

 

 

0

 

 

 

 

 

–dB

3 Set the tape deck or VCR to the recording mode.

4 To monitor a source selected by the REC OUT selector, press the corresponding input selector button.

Note:

•When the REC OUT selector is set to “SOURCE”, the source selected by the input selector buttons is output through the TAPE 1-REC OUT, the TAPE 2-REC OUT , the VCR 1-OUT, and the VCR 2-OUT terminals.

•When the REC OUT selector is set to something other than “SOURCE” and you press an input selector button other than the one you pressed in step 2, the recording source will not be changed and you can enjoy another source while recording.

•To record from tape deck 2, set the REC OUT selector to SOURCE, and press the TAPE 2/MONITOR input selector.

•If the tape deck connected to the TAPE 2 REC OUT terminal has 3-head monitoring capability, you can monitor the signal just recorded on the tape by pressing the TAPE 2/MONITOR switch.

•DSP, VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the material being recorded.

19