TAPE 2

 

 

4

 

 

REC

 

 

OUT

 

4

FRONT

 

 

IN

 

5

FRONT

 

 

OUT

 

6

FRONT

0dB

 

 

LEVEL

-10dB

 

 

4FRONT CH — MAINÊ IN terminals

These terminals are for line input to the built-in front channel amplifier. Leave the jumper bars connected to the PREÊ OUT terminals when you use the built-in amplifier.

However, if you drive front speakers with an external stereo power amplifier, remove the jumper bars.

5FRONTÊ CH — PREÊ OUT terminals

These terminals are for front main channel line output. Leave the jumper bars connected to the MAINÊ IN terminals when you use the built-in amplifier.

However, if you drive front speakers with an external stereo power amplifier, remove the jumper bars and connect the input terminals of the external amplifier (MAIN IN or AUX terminals of a power amplifier or an integrated amplifier) to these terminals.

6FRONT LEVEL switch

Normally set to “0Ê dB”. If desired, you can de- crease the output level at the FRONT SPEAKERS terminals by 10Ê dB by setting this switch to “–10Ê dB”.

 

LD/TV

 

 

MAIN

 

5CH

LD/TV

7

DISCRT

CENTER

INPUT

 

 

 

LD/TV

 

 

SURROUND

 

75CH DISCRT INPUT terminals

These terminals are used with a Dolby Surround AC-3 decoder. Connect the main audio output of the decoder to the LD/TV MAIN input terminals, the center channel audio output to the LD/TV CENTER input terminal, and the surround audio output to the LD/TV SURROUND input termi- nals.

Note:

The 5CH DISCRT INPUT terminals are for used with an AC-3 decoder.

When you use a Dolby Surround AC-3 decoder, the LFE (Low Frequency Effect channel) signal coming from the AC-3 decoder to this unit must be mixed with the main output signal. Refer to your AC-3 decoder’s operating manual for information about mixing these signals mode.

ENGLISH

15