To clear a learned function

1 Set to the “USER” position.

USER

YPCLEARN

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold the key where the learned function to be deleted is until the indicator flashes 3 times.

TRANSMIT

/LEARN

• To clear two or more functions, repeat step 2 and 3.

Note:

If a key is not pressed soon after the CLEAR button is pressed, this unit will automatically return to the status that was in effect before the CLEAR button was pressed.

To clear all learned functions

1 Set to the “LEARN” position.

USER

YPCLEARN

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold any key until the indicator flashes 7 times

TRANSMIT

/LEARN

ENGLISH

Troubleshooting guide

SYMPTOM

CAUSE

REMEDY

 

 

 

The remote control transmitter does not work.

The batteries of this remote control transmitter are

Replace the batteries with new ones and press the

 

weak.

RESET button on the remote control transmitter.

 

 

 

Learning cannot be made successfully. (The

The internal microcomputer “freezes”.

Replace the batteries (and press the RESET button

TRANSMIT/LEARN indicator does not light up or

 

for this remote control transmitter).

flash.)

 

 

The batteries of this remote control transmitter

Place the remote control transmitters with the

 

 

and/or the other remote control transmitter are

proper distance.

 

weak.

 

 

 

 

 

The distance between the two remote control

Learning is not possible.

 

transmitters is too long or too short.

 

 

 

 

 

The signal coding or modulation of the other

Further learning is not possible without deleting

 

remote control transmitter is not compatible with

unnecessary commands.

 

this remote control transmitter.

 

 

 

 

 

Memory capacity is full.

Press the RESET button on the remote control

 

 

transmitter.

 

 

 

39