Yamaha RX-V990 SPEAKER BALANCE ADJUSTMENT

ADJUSTMENT BEFORE OPERATION

SPEAKER BALANCE ADJUSTMENT

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory.

1

6

TRANSMIT	USER				5
/LEARN	YPC	LEARN
POWER	SLEEP	TV	VCR	AUX
SKIP			DISC	PHONO
			SKIP
SEARCH		PAUSE/STOP	PLAY	CD
DECK A/B	PRESET		A／B／C／D／E	TUNER

—+

SEARCH		STOP	PLAY	TAPE 1
REC MUTE	REC/PAUSE	DIR A	DIR B	TAPE 2 MON

2 3 4

SEARCH PAUSE/STOP PLAY LD/TV

*If you have a video monitor connected to this unit, you should use it to display the on screen information. The easy-to-read information will help you to perform this adjustment.

Note:

Before adjustment, make sure that the mute circuit is not engaged. While mute is engaged, no sound will be heard and an indicator on the master VOLUME control flashes. See page 23 for details.

1 Set to the “∞” position.					4 Set the remote YPC-USER-LEARN switch to the “YPC”
	VOLUME				position.
	l8	l6	l4
	20		l2				USER
	24		l0			YPC
	28			8			LEARN
	34			6
	40			4
	50			3
	60			2	For detailed information about the remote control transmitter,
	70	–dB	l
			0		refer to “REMOTE CONTROL TRANSMITTER” on page 34.
2 Set to the “0” position.					5	POWER	Press the POWER
BASS			TREBLE
l	l		l	l			switch to turn on the
	0			0			power.
2	2		2		2
3	3		3		3
4	4		4		4
5	5		5	5
3 Set to the “0” position.					6 Select the main speakers to be used.
	BALANCE					SPEAKERS
						A	B
		0
	l		l
	2		2
	3		3		• If you use two main speaker systems, press both the A and
	4		4
	L 5		5 R		B switches.

18